Tusq XL Lubricated Nut
|
|
|
|
|
|
|
|
|
|
|
Model: PQL-1000
The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shaped but requires slots to be complete.
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.75" |
0.123" |
0.175" | NA |
| mm | 44.45mm | 3.12mm | 4.45mm |
NA |
Model: PQL-2200-00
The PQL-2200-00 is a great option to replace and upgrade the nut on your Fender style guitar or bass. This nut is not slotted. Fits right or left hand guitars.
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.75" |
0.123" |
0.175" | 0" |
| mm | 44.45mm | 3.17mm | 6.2mm |
NA |
Model: PQL-4000-00
The PQL-4000-00 is a great option to replace and upgrade the nut on just about any guitar. It is not slotted so this will need to be done.
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.905" |
0.192" |
0.375" | 0" |
| mm | 48.39mm | 4.88mm | 9.52mm |
NA |
Model: PQL-1204-00
The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple.
Specs:
Specs:
| Measure | Length | Width |
Height |
E to G |
| inches |
1.65" |
0.125" |
0.187" | 1.25" |
| mm | 41.91mm | 3.17mm | 4.75mm |
31.75mm |
Model: PQL-1214-00
The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
Specs:
| Measure | Length | Width |
Height |
E to G |
| inches |
1.554" |
0.128" | 0.187" | 1.223" |
| mm | 39.47mm | 3.25mm | 4.75mm | 31.06mm |
Model: PQL-5000-00
The PQ-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom. It is pre-slotted to make for a quick and easy install.
Specs:
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.687" |
.128" |
.198" | 1.363" |
| mm | 42.85mm | 3.25mm | 5.03mm |
34.62mm |
Model: PQL-5010-00
The PQ-5010-00 is a great option to upgrade the nut on your Fender style electric guitar. It is pre-slotted for a quick and simple install.
Specs:
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.764" |
0.130" |
0.255" | 1.362" |
| mm | 44.81mm | 3.3mm | 6.48mm |
34.59mm |
Model: PQL-6010-00
The PQ-6010-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made before 2014 or any similar guitar. It is pre-slotted to make for a quick and easy install. The 6011 (post 2014) is slightly taller than this nut, when in doubt, choose the 6011, as you can always sand the bottom of the nut to adjust lower. 18" Radius
Specs:
Model: PQL-4011
Model: PQL-6060-00
The PQL-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. 15" Radius.
Specs:
Model: PQL-4061-00
The PQL-4061-00 is our new design of blank nut for Epiphone style electric and acoustic guitars requiring a 1/4" nut thickness. It`s permanently lubricated with PTFE, for better tuning stability. Final sanding and slotting is required.
Specs:
| Measure | Length | Width |
Height |
E to E |
| inches |
1.718" |
0.193" |
0.371" | 1.397" |
| mm | 43.64 | 4.90 | 9.41 | 35.47 |
Model: PQL-4011
The PQL-4011-00 is our new design of blank nut for Gibson style guitars and many acoustic guitars (3/16" nut thickness). It's permanently lubricated. Final sanding and slotting is required.
Specs:
| Measure | Length | Width | Height | E to E |
| mm | 46.67mm | 4.85mm | 10.59mm | NA |
| inches | 1.837 | 0.191 | 0.417 | NA |
Model: PQL-6060-00
The PQL-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. 15" Radius.
Specs:
| Measure | Length | Width | Height | E to E |
| inches | 1.730" | 0.239" | 0.357" | 1.344" |
| mm | 43.94 | 6.08 | 9.08 | 34.14 |
Model: PQL-4061-00
The PQL-4061-00 is our new design of blank nut for Epiphone style electric and acoustic guitars requiring a 1/4" nut thickness. It`s permanently lubricated with PTFE, for better tuning stability. Final sanding and slotting is required.
Specs:
| Measure | Length | Width | Height | E to E |
| inches | 1.932" | 0.25" | 0.437" | 0" |
| mm | 48.84mm | 6.60mm | 11.15mm | 0mm |